Blink Code 2111

Bernie Benz b.benz at
Sat Dec 2 19:50:26 EST 2006

You can certainly check the sensor for open or short. Pull the sensor and
check/clean its face. Reinstall with it as close as possible into the FW
teeth, no adjustment here I think. check wiring and connectors back to the


> From: CLAG500 at
> Date: Sat, 2 Dec 2006 18:49:10 EST
> To: 200q20v at
> Subject: Blink Code 2111
> Hey Guys,
> Been getting this code when I do the blink test.
> 2111 (Blink Fault Code), VAG1551/2 Fault Code Number 00513 RPM  sensor Open
> or short circuit, Defective sensor & cables, metal fragments on  flywheel
> teeth.
> If I pull the ECU fuse and re-check I get code 4444 meaning  everything is
> OK. (car also seems to run noticably better). After driving a week  I decided
> to re-check and the 2111 code has returned(no other codes either). The  engine
> speed sensor (G28)appears to be new so the PO may have been having the  same
> problem. 
> Any experience, guesses or comments appreciated.
> Chad  

More information about the 200q20v mailing list