jlagnese at massed.net
Sun Dec 3 18:55:34 EST 2006
Here is the list from my fuse cover:
1 Front fog light (empty)
2 fan (engine radiator)relay
3 cooling fan delay
4 headlamp washer control unit (empty)
5 relief relay
6 air conditioner relay (empty)
7 horn relay
8 starter lockout relay AT relay A3
9 intermittant wiper relay
10 relay for manifold preheater, K-jetronic, diesel pre-glow (TDI)
11 air conditioner relay (empty)
Is it normal to not have either ac relay? Does anyone have the number of
one or both of those 2 relays?
From: Bernie Benz [mailto:b.benz at charter.net]
Sent: Sunday, December 03, 2006 3:20 PM
To: John Lagnese
Cc: 200q20V mailing list
Subject: Re: Clicking relay
Bentley and the description list inside my fuse box cover show #3 relay
the horn relay. Should be an easy test. Relay positions number from L to
looking from driver¹s side, first row is the one closer to the engine.
> From: "John Lagnese" <jlagnese at massed.net>
> I only have books 1 & 2 of the 3 volume set. The # 3 relay is cooling
> fan delay. I just went out and checked the cover of the fuse box. This
> is the under hood unit.
> -----Original Message-----
> From: Bernie Benz [mailto:b.benz at charter.net]
> Sent: Sunday, December 03, 2006 1:32 PM
> To: John Lagnese
> Cc: 200q20V mailing list
> Subject: Re: Clicking relay
> You must not have access to the Bentley wiring diagrams, inasmuch as
> relay in the main fuse box is the horn relay and #3 in the Aux panel
> the interior light delay control unit. The only relay in the CC system
> the compressor clutch relay. The fresh air fan delay is controlled by
> engine coolant temp. sensor input to the A/C control head.
> Sorry, can¹t help much from your symptoms.
>> From: "John Lagnese" <jlagnese at massed.net>
>> I have been having an annoying problem with my 91 200 20V. Since
>> had the car, when my climate control is set on auto or defrost the
>> system is fine. If I set it to bilevel or econ the #3 relay starts to
>> click fairly rapidly. I believe this is the cooling fan delay relay.
>> tried a new relay and there was no change. Recently the relay slowly
>> clicks even on auto or defrost now.
>> Does anyone have any experience with this or any ideas?
More information about the 200q20v