kneale at coslink.net
Wed Dec 6 08:18:22 EST 2006
Chris Miller's 200q20v website has an illustrated write-up on the heater
core replacement: http://members.aol.com/c1j1miller/climate.html#Heater blower
At 06:53 AM 12/6/2006 -0500, Eric Huppert wrote:
>Would definitely recommend replacing the blower motor while it's apart! (or
>at least check the brushes and ensure there's quite a bit left!) Not overly
>expensive and not a job you'll want to do twice...BTDT!
>Hopefully you have a garage or semi heated area if you're going to undertake
>this job... It's not overly difficult, just a PITA. Would allow for a full
>day, but really should only take four hours or so... Take care and notice
>how the heater box comes apart as it has to go back together the same way...
>It's a job that requires a little patience and thought, really isn't any
More information about the 200q20v