Fuel pump

Peter Schulz pcschulz at comcast.net
Tue Feb 7 11:15:20 EST 2006

I went through a similar situation...

I did have the sleeve for the smaller pump, but not the different hose...

I managed to get some high pressure fuel injection hose from an 
autoparts store and cobble something together with the banjo barbed 
hose fittings...alot cheaper than the $160....


At 09:52 AM 2/7/2006, motogo1 wrote:
>I don't know about the pressure/flow rates, but I would try it if it fits in
>the basket. I just went through this hassle. I'll try to keep it short. I
>ordered a fuel pump for my 91 200. It is an updated pump and is much too
>small to fit in the holder basket, and it needs a $160 adapter hose (dealer
>part) because it has a nipple instead of screw on fitting. I ended up
>getting a Pierburg pump for a 93 V8 quattro. Not quite an exact fit, but it
>Gary Martin
>94 UrS4
>91 200 TQA
>----- Original Message -----
>From: "Feelstranger" <feelstranger at hotmail.com>
>To: <200q20v at audifans.com>
>Sent: Tuesday, February 07, 2006 9:15 AM
>Subject: Fuel pump
>O collectively wise collective...
>I need a new fuel pump.  I have a new pump that was never installed in a
>previously owned 88 5000 QTA.   I just pulled the pump from my 20V and it is
>a Bosch 63 mm unit (original?)  So, would the unit I bought for the 5000
>work, or are they likely to have different pressure or flow rates?
>Otherwise they are the same in size and shape.
>Is it possible that this could be fixed without spending any (more) money???
>200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>200q20v mailing list    http://www.audifans.com/mailman/listinfo/200q20v

-Peter Schulz
Chelmsford Ma, USA

1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1991 90 20v Q Red
1990 CQ silver (awaiting S2 engine transplant)
1990 CQ red ( to part or not)

More information about the 200q20v mailing list