Fuel pump

Bernie Benz b.benz at charter.net
Tue Feb 7 16:53:03 EST 2006

You must also order a cheap plastic adaptor to firmly hold the smaller pump
in the original basket. Further, it does not need a special adaptor hose,
just replace the original stiff plastic hose with a piece of rubber fuel
hose with hose clamps. BTDT.


> From: "motogo1" <motogo1 at cox.net>
> Date: Tue, 7 Feb 2006 09:52:05 -0500
> To: "Audi 200" <200q20v at phoenix.audifans.com>
> Subject: Re: Fuel pump
> I don't know about the pressure/flow rates, but I would try it if it fits in
> the basket. I just went through this hassle. I'll try to keep it short. I
> ordered a fuel pump for my 91 200. It is an updated pump and is much too
> small to fit in the holder basket, and it needs a $160 adapter hose (dealer
> part) because it has a nipple instead of screw on fitting. I ended up
> getting a Pierburg pump for a 93 V8 quattro. Not quite an exact fit, but it
> works.
> Gary Martin
> 94 UrS4
> 91 200 TQA
> ----- Original Message -----
> From: "Feelstranger" <feelstranger at hotmail.com>
> To: <200q20v at audifans.com>
> Sent: Tuesday, February 07, 2006 9:15 AM
> Subject: Fuel pump
> O collectively wise collective...
> I need a new fuel pump.  I have a new pump that was never installed in a
> previously owned 88 5000 QTA.   I just pulled the pump from my 20V and it is
> a Bosch 63 mm unit (original?)  So, would the unit I bought for the 5000
> work, or are they likely to have different pressure or flow rates?
> Otherwise they are the same in size and shape.
> Is it possible that this could be fixed without spending any (more) money???
> Thanks
> Nat
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> _______________________________________________
> 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list