Front wheel bearing
John S. Lagnese
jlagnese at massed.net
Fri Feb 24 16:33:57 EST 2006
It didn't dribble after everything was apart.
----- Original Message -----
From: "Chuck Pierce" <cpcycle at earthlink.net>
To: "John S. Lagnese" <jlagnese at massed.net>; "200 list"
<200q20v at audifans.com>
Sent: Friday, February 24, 2006 2:17 PM
Subject: Re: Front wheel bearing
> When you pull the axle bolt out, the dribble coming out the hole is from
> the grease in the CV joint.
> Unless a bunch comes out it should not be a problem. If it continues put
> the bolt back in after you pull the axle
> out of the hub. The grease from the CV joint and the axle bearing are not
> Chuck Pierce
> 91 200tq Avant
> John S. Lagnese wrote:
>>I'm changing my right front wheel bearing on my 91 200 Quattro Turbo 20V.
>>There was some type of oil oozing out when I took out the axle bolt and
>>then inside the hub. Is this just the wheel bearing losing its grease? I
>>didn't see any other source. I've never seen this before, as you could
>>200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
More information about the 200q20v