Anyone have a used 3b chipped ecu, or 20vt eproms for a reasonable price?

alan cordeiro alancordeiro at
Sun Jan 8 20:59:21 EST 2006

There were a few group buys, with Ned Ritchie (IA) and Mineah Cotet
but each required the pressure transducer to be replace or "modified"
to read from 0 to 2.5 bar  (presently it reads 0-2 bar)

Ned required ECUs to be sent to him, and he upgraded them,
checked them and sent them back.

A bunch of us removed transducers and sent them to Mineah
and he "adjusted " them to go 0-2.5 bar, then we replaced the
EPROMs ourselves.

Also just FYI, the EPROMS are already in sockets. The
absolute pressure transducer requires unsoldering/resoldering


----- Original Message ----- 
From: "Brian Larson" <brian.erin at>
To: <200q20v at>
Sent: Sunday, January 08, 2006 8:45 PM
Subject: Anyone have a used 3b chipped ecu,or 20vt eproms for a reasonable

Does something like qlcc exist for the 3b motor for the DIY'er with access
to an eprom burner, a couple of machined pin sockets, and a soldering

200q20v mailing list

More information about the 200q20v mailing list