Spings 'n' things

andyschlueter andyschlueter at 4techwork.com
Wed Mar 8 09:26:51 EST 2006

Ok, I finished up my suspension last night around 11. Everything went real
well. I did the rears in about 2 hours. So I was done by noon, fronts on the
other hand took a bit longer. I also had more distrctions and lunch then
dinner. Here are the differences between the 200 sports and the s4/s6 race
springs. The rears had same number of coils, but the race has thicker coils.
The front had one extra coil and was slighly thicker. I ended up having to
buy wheel studs for the 15mm spacer on the front and 17mm spacer on the
rear. I had to run a minimum of 15mm to clear the taper on the 16" bbs moda
rims over the front calipers. I am extreamly happy with the ride and drive
of the car. Feels like I drive a porsche now. I will be installing the West
Motorsport camber plates in the next few weeks when they are done being
made. I'll post some pictures later tonight to shoe the befor and after.

Now a very empty wallet,
Andrew W. Schlueter
'91 Audi 200tq20v Avant

-----Original Message-----
From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com] On
Behalf Of andyschlueter
Sent: Monday, March 06, 2006 9:40 PM
To: 200q20v at audifans.com
Subject: Spings 'n' things

Tuesday starts one of my long awaited projects. Fresh suspension.
Here is the short list:
Bilstein sports all around
H&R 29771 S4/S6 Race springs
West Motorsports Big Brake v2.0
16" moda rims
upper bearings
sway bar busings
 blah lah blah

I'll post some before and after pics

Andrew W. Schlueter

'91 Audi 200tq20v Avant

www.westmotorsports.biz <http://www.westmotorsports.biz/>

200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v 

More information about the 200q20v mailing list