Door won't open from inside or out

Peter Schulz pcschulz at
Thu Dec 13 10:10:22 PST 2007

Possible that the cable from the inside door 
release is loose, - pull back the lever, remove 
the philips screw and carefully remove the handle - try it then.

I had a similar issue - turned out that I didn't 
reinstall the square cable retainer clip in the correct position.


At 12:48 PM 12/13/2007 -0500, you wrote:
>I don’t know what I did as I was replacing the 
>window regulator ­ now working.  I put it
>all back together and panel back on.  When I 
>went to open the door, it won’t unlatch.
>Tried it from the inside and it did the first 
>time.  Now it won’t open from inside or
>out.  So any tricks to getting these doors open 
>without removing the panel, since you
>need to open the door to remove the panel?
>Car is a ’91 200Q20V.
>200q20v mailing list

-Peter Schulz
Chelmsford Ma, USA

1995.5 S6 Avant Emerald/Ecru
1995.5 S6 Avant Silver/Platinum
1991 200 20v Q Avant Titan Grey (for sale)
1991 90 20v Q Red
1991 CQ silver  (eS2 recipient) 

More information about the 200q20v mailing list