200q20v Digest, Vol 39, Issue 8

SuffolkD at aol.com SuffolkD at aol.com
Mon Jan 8 01:34:52 EST 2007

I'm not sure you have to strap a 20V IC.

The 10V lacked a BOV which the 20V has similar too.........

The 20V plumbing is routed to prevent compressor stall or backpressure which 
was bursting the 10V IC set-ups at high boost and throttle snapping shut.

The experts will clarify what I'm hinting at without the exact and proper 

20V IC no need to strap IMHO.
10V different story.

-Scott by BOSTON

> From: "Eric H" <>
> Subject: 20V Intercooler strapping
> <<<SNIP>>>
> Last thing to fix before the chip install was the valve seals, so seeing as
> how the IC is already out figured now was a good a time as any to strap!!!
> (Besides, finally got the trim clips for the front chrome, don't want to
> take the grill back out)

More information about the 200q20v mailing list