Oil pressure sending unit and gauge diagnosis

Eric Huppert dragracer at netstep.net
Mon Jan 8 20:55:46 EST 2007

No, it's the top one which requires a wrench behind it... But as I'm
searching the archives I'm wondering if I'm replacing the right one? Guess I
need to check it with the meter and get a better handle on which
sensor/pressure gauge does what

Symptoms are:

Gauge is usually pegged, past 5 bar. Occasionally it drops to 2 bar, but
doesn't fluctuate with throttle variation. Need to do a little more research
I guess...

Not getting any warning beeps or signs on display
thanks, Eric

  -----Original Message-----
  From: PeterBergin at aol.com [mailto:PeterBergin at aol.com]
  Sent: Monday, January 08, 2007 8:45 PM
  To: dragracer at netstep.net; 200q20v at audifans.com
  Subject: Re: Oil pressure sending unit

  If it is the one on the front of the motor under the T-stadt, I used a
socket with a combination of universal joints and extensions.  Hardest part
was starting the threads on the new one.

  Pete, 91 Avant

More information about the 200q20v mailing list