I brok it
ekellock at gmail.com
Tue May 15 15:41:38 EDT 2007
I had an issue with this piece on the dist for either my urq or the
Avant, I can't remember, but I think I used some JB Weld to secure it.
Mine was only broken enough that it would not stay securely in place
though, so if your's is fairly smashed, then this might not be an
On 5/15/07, Chuck Pierce <cpcycle at earthlink.net> wrote:
> Hi Guys
> Home from school, trying to get the Avant on the road.
> I was knocking the old dist. gear off to replace it with the brass one.
> But..........as the gear came off the distributor fell off the vise and
> broke the (i believe) the connector for the hall sender.
> Does any one have a old distributort that they could pull this piece off of.
> It is the piece that the hall sensor plugs into and mounts on the side
> of the distributor.
> The PN# on the piece is 1 230 329 049
> So much for progress today :-(
> Chuck Pierce
> 91 200 20v Avant
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
More information about the 200q20v