Sport Seat seat heaters

Tony Hoffman auditony at
Sun Nov 11 19:20:43 PST 2007


The sport seats have much narrower heaters. The procedure isn't too
complicated. Basically, remove the seats, remove the backrest, then
take the covers off. To remove the backrest, you will pull the trim
off both sides, then you will see a clip that slides off. Once taken
apart, you will open a bunch of hog rings on the bottom of the seat.
For the backrest, there are four pointy triangles that need to be bent
upward, then pull the cover off each side. These are on the bottom of
the backrest, BTW. You will also need to remove the headrests and the
pegs that they go in. They will come out when you have access into the
back of the seat, with the rear cover removed.

Tony Hoffman

On Nov 11, 2007 5:13 PM, Eric Huppert <ehuppert at> wrote:
> Have read the dissection process for comfort seats, can anyone provide some
> detail on the sport seats?
> Also, is the heater element the same as the comforts? Have another set of
> seats I could pull the element out of if needed.
> Thanks, Eric

More information about the 200q20v mailing list