Euro Headlight part needed......

Geraint Lloyd geraintlloyd_qc at
Sun Nov 18 11:33:31 PST 2007

OR if you don't want to bend the pin on the "relay" you can just use 2
jumpers following the instructions on:

About half way down the page.

Just options for you

Both will work, so you can say goodbye to the BEEEEEEEEEEEP


-----Original Message-----
From: 200q20v-bounces at [mailto:200q20v-bounces at] On
Behalf Of Bernie Benz
Sent: November 18, 2007 1:56 PM
To: Jim Fleischer
Cc: 200q20V mailing list
Subject: Re: Euro Headlight part needed......

The side marker lite and the city driving lite are two different  
bulbs in different locations.

To disable the headlight warning system, remove Front Lamp Control  
Unit / relay and bend its narrow pin 90 degrees such that it will not  
engage its socket. Reinstall.


On Nov 18, 2007, at 9:16 AM, Jim Fleischer wrote:

> Hey guys,
> When I purchased my Euro headlights a couple of years ago, I didn't  
> realize it, but they came without the driver's side parking light  
> bulb holder, possibly it's the "city" bulb.  After installation, it  
> became readily apparent.  Was wondering if anyone had one kicking  
> around or could point me in the right direction to source one.  The  
> headlight warning light is starting to drive me crazy every time I  
> put the lights on, and switch from brights to low beams.  Thanks!
> Best regards,
> Jim Fleischer
> '91 200 TQ
> '95 S6 avant
> '83 ur
> _______________________________________________
> 200q20v mailing list

200q20v mailing list

More information about the 200q20v mailing list