re. Any BTDT on 3B single pass intercooler install into earlier Type 44
benswann at comcast.net
Sun Oct 14 14:19:31 PDT 2007
Basically cut the Crossover pipe in the center and rotated 45 deg. Down and dissected
and reassembled fancy radiator hose and couplers to produce nice turbo to intercooler
hose with no sharp bends and a Bypass Valve Fitting inline. All was fine, but this
project does require more bending, cutting and fitting than expected, but that is how
[Date: Sat, 13 Oct 2007 10:46:46 -0700 (PDT)
From: Austin Calise <stincalise at yahoo.com>
Subject: Any BTDT on 3B single pass intercooler install into earlier
type 44 (5kt/200)?
To: 200q20v at audifans.com
Message-ID: <802474.11307.qm at web56111.mail.re3.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
One option can be seen here http://www.justfourrings.com/phpBB2/viewtopic.php?t=191
By cutting the cross pipe and installing a reducer and an metal elbow.
Another option is to what I did and use a piece of prop shaft to extend the pipe down
more like a euro 1B IC http://www.motorgeek.com/phpBB2/files/678087_22_full_945.jpg
I also used a reducer elbow 3 to 2.5 not pretty but it works.
More information about the 200q20v