latest on boost saga/notched P.T.
benswann at verizon.net
Mon Dec 22 08:21:16 PST 2008
Notched pressure transducer is needed because VMAP wa designed to fit into the ECU for
the AAN and does not fit properly into the one for the 3B. A small corner section of
the VMAP board needs to be carefully cut/notched out so it fits onto the ECU board.
At least that is what I presume because that is what I have to do.
[From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com] On Behalf Of
Sent: Friday, December 19, 2008 10:25 AM
To: 200q20V mailing list
Subject: Re: latest on boost saga
i let it warm up, then punched it, hauls ass. more linear power band than with the IA3+
(Dan cut me a deal on the 034 chip set and 3.0 bar map sensor). i assume because the
notched map sensor helps?
More information about the 200q20v