UrS and 200 ball joint failures

Bernie Benz b.benz at charter.net
Sat Nov 15 06:56:17 PST 2008

Find a new wrench or DIY.


On Nov 15, 2008, at 5:03 AM, michael wrote:

> I had the springs and shocks assemblies replaced at 150k when I also
> had all the suspension bushings replaced.
> The noise had already occurred and I mentioned it to the indy that
> did the work.
> Too bad they didn't recognize the symptom so that they could have
> done it when working on the area.
> Thanks.
> On Nov 13, 2008, at 3:14 PM, Schaible, David wrote:
>> My personal 0.02$ is this is not a big concern as itdoesnt usually
>> affect handling too much,  I would wait until I had good reason to
>> remove  the strut assemblies b/c they are a major hassle and require
>> special tools and know how to get this back together properly.
>> If you have cash, then by all means get it fixed right away and pay a
>> shop to do it.
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list