TPS fault code

YBK ybk at
Fri Aug 14 14:11:54 PDT 2009

What about measuring directly at ECU?
I wonder if Bentley manual has a procedure...

-----Original Message-----
From: David G <daveglu at>
To: 200q20v at
Subject: TPS fault code
Date: Tue, 11 Aug 2009 22:36:30 -0700

My car is in limp mode and fault code indicates TPS, but as far as I can 
tell (ohm meter, disassemble and check) and also checking adjustment, still 
sets the code.
car is completely stock.

At this point I may swap TPS's with another car to see what happens, any 
other suggestions?

Dave G

----- Original Message ----- 
From: "Austin Calise" <yoda_audi at>
To: <200q20v at>
Sent: Tuesday, August 11, 2009 10:03 AM
Subject: Re: Is it the TPS?e

1st is there a fault code for the TPS? If not have you checked the ohm's to 
see if it's in spec?
Does the tps click while closing? Have you checked your spark plugs? 
Assuming they are the stock f5dpor how old are they? Is the car chipped if 
so how much boost are your producing?
Anything higher than 22psi on the 2.5 PT is not good.

HTH's Austin

200q20v mailing list

200q20v mailing list

More information about the 200q20v mailing list