motor mounts

John Lagnese jlagnese at
Sun Feb 22 17:57:04 PST 2009

This ended up taking about three hours. This included 1/2 hour checking
the Bentley. It was, as usual, useless.

-----Original Message-----
From: 200q20v-bounces at [mailto:200q20v-bounces at]
On Behalf Of Austin Calise
Sent: Tuesday, February 17, 2009 12:39 AM
To: 200q20v at
Subject: Re: motor mounts

John, it isn't too bad the passenger side is harder than the drivers
side. To do the drivers side you need remove the front 2 subframe bolts
to drop the SF to be able to remove the mount other than that pulling
the heat shield on the frame rail and you should be good.
1 17mm nut on the top and 2 15mm nuts iirc on the bottom. You'll want to
support the motor under oil pan with piece of wood on  a floor jack.
HTH's Austin

--- On Tue, 2/17/09, John Lagnese <jlagnese at> wrote:
From: John Lagnese <jlagnese at>
Subject: motor mounts
To: quattro at, "'200q20V mailing list'"
<200q20v at>
Date: Tuesday, February 17, 2009, 12:17 AM

I need to replace my two motor mounts on my 91 200 TQ 20V. How much work
am I in for? Any BTDT experiences to be aware of?


200q20v mailing list

200q20v mailing list

More information about the 200q20v mailing list