Loose ball bearings by flywheel?

Mike xthejuicex at gmail.com
Mon Sep 28 11:15:09 PDT 2009

Thanks for all the ideas. Does this mean that I will need a new clutch or
flywheel? Also, how hard is that to change by yourself as I can't afford to
take it to a dealer.


On Mon, Sep 28, 2009 at 1:28 PM, Claus Vegener <vegener at post7.tele.dk>wrote:

> I think it is the clutch trust bearing.
> Claus
> 200 20V Avant 90
> Urq 83, 549 Hp
> ----- Original Message ----- From: "Mike" <xthejuicex at gmail.com>
> To: <200q20v at audifans.com>
> Sent: Sunday, September 27, 2009 11:43 PM
> Subject: Loose ball bearings by flywheel?
>  Hey everyone. I was checking out to see if the cps pin on my flywheel was
>> broken and when I pulled out the starter to look through the hole at the
>> flywheel, these small metal balls came out. They had grease on them and
>> when
>> I poked around inside i could see and feel some small sharp pieces of
>> metal.
>> Did some bearing explode or something? Here is a pic of the balls and are
>> next to a lighter for reference. http://i38.tinypic.com/2yum6md.jpg . BTW
>> the car won't start but would crank over and get fuel.
>> Thanks
>> Mike
>> _______________________________________________
>> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list