<html><head></head><body><a class="moz-txt-link-abbreviated" href="mailto:GSTREIN@aol.com">GSTREIN@aol.com</a> wrote:<br>
<blockquote type="cite" cite="mid:firstname.lastname@example.org"><pre wrap="">Hi Steve,<br><br>Had a few questions regarding Keith's UFO reto. kit. You mention S4 hubs, do <br>you know if the hubs that are on the 1992 on V8's that use the G60 Calipers <br>is considered the S4 hub. What I am trying to determine is if I convert to <br>the G60 Calipers with Struts/Hubs from a 1993 V8 if I could still use Keiths <br>upgrade kit...just not need the hub mod or is this yet another hub <br>configuration?<br><br>Thanks! Frank Gstrein<br><br>In a message dated 11/27/00 3:59:58 PM, <a class="moz-txt-link-abbreviated" href="mailto:email@example.com">firstname.lastname@example.org</a> writes:<br><br><< Frank,<br> I just sent out a message to the 200 group that explains the upgrade <br>and costs (actually have been sitting on it for a week or so - wanted <br>Keith Anderson look it over before I sent this out (he doesn't use <br>email)). If you have any more questions drop me a line or ca!
ll Keith. <br>I love the upgrade and am now back w/UFO's for my winter tires and <br>wheels. Good luck.<br>Steve<br><br><a class="moz-txt-link-abbreviated" href="mailto:GSTREIN@aol.com">GSTREIN@aol.com</a> wrote:<br><br></pre>
I am not sure if this is the same hub size ...only sure that the ur
S-4hubs will fit the UFO upright. If you go to a non UFO upright then this
conversion kit will not work ... bolt holes and spacing of the bracket is
specific to the original UFO upright. The whole reason for this upgradewas
to make it cheaper (hopefully) than converting to G-60 style srut mounts(uprights).
If I understand it you need more than the uprights replaced... also need
to a control arm - I think the one attached to the ball joint. If you
go to the G-60 brake setup, BIRA has a system that will work usingthe same
996 caliper and S-4 tt rotor (same size as the A-8 rotor in Anderson'skit).
If you can just get hold of the V-8, G-60 hubs, I think (but notcompletely
sure) that they will fit the UFO upright and then Keith's systemwill work.
Someone on the list can hopefully surely help us out with hub fitment.<br>