[A4] A4 Digest, Vol 43, Issue 6

Phil Yee philter at myway.com
Fri May 25 13:38:15 EDT 2007


I didn't find any tricks.  Unplug the wire, and maybe another nearby harness.  It's fairly tight and dirty, but not very difficult.  The only thing that helped me is the old gasket/oring trick of pre-lubing it with a just little bit of bar hand soap.  Nice thing is that it's arranged so that when you swap it, there very little chance of any significant air bubble forming.
Message: 1Date: Thu, 24 May 2007 19:00:35 -0400From: Peter Kirby <4pkirby at gmail.com>Subject: [A4] changing engine coolant temperature sensorTo: "'A4 at audifans.com'" Message-ID: <46561913.9080404 at gmail.com>Content-Type: text/plain; charset=ISO-8859-1; format=flowedAny BTDT?I am getting a check engine light that my ProDiag claims is a sporadic high reading from the engine coolant temperature sensor. I've bought a new and was planning to install it but see that there is the usual forest of things in the way. Any suggestions of what has to be removed and if there are any tricks in getting the old one out.Patient is a 2001 1.8t.Thanks.Peter------------------------------_______________________________________________A4 mailing listA4 at audifans.comhttp://www.audifans.com/mailman/listinfo/a4End of A4 Digest, Vol 43, Issue 6*********************************

No banners. No pop-ups. No kidding.
Make My Way  your home on the Web - http://www.myway.com

More information about the A4 mailing list