[A4] Clutch Pedal to the floor!

Peter Kirby 4pkirby at gmail.com
Mon May 26 05:09:44 PDT 2008

I had the same on my old 20V90...I assumed it was the slave so I
replaced it.  No difference.  Then changed the master and it was
perfect after that.

If you had loose bits floating around in there, I'm sure you'd hear  it.


On Sat, May 24, 2008 at 7:02 PM, Richard Hurt <rnhurt at gmail.com> wrote:
> Hey all,
> My clutch pedal just went to the floor and didn't come back.  There is no
> resistance either way and I can push it/pull it into position however the
> clutch does not engage and I cannot drive the car.  Any thoughts?
> My first thought was master/slave cylinder?  I'm thinking that both should
> be replaced if either one is replaced.  I've gone through this before on my
> Corrado and it's always better to just replace them both at once.  Has
> anyone replaced these before?  How bad is it?
> Thanx!
>  Richard
> _______________________________________________
> A4 mailing list
> A4 at audifans.com
> http://www.audifans.com/mailman/listinfo/a4

More information about the A4 mailing list