[A4] Changing Control Arms...

Brandon Rogers brogers at terrix.com
Thu Jan 15 14:02:05 PST 2009

B5S4 on AW.  Like I said it's been a couple week or so - and I don't spend
much time there.  So it may be buried a few pages - of course they have a
decent Search function...

-----Original Message-----
From: Derek Pulvino [mailto:dbpulvino at hotmail.com] 
Sent: Thursday, January 15, 2009 2:11 PM
To: brogers at terrix.com; a4 list
Subject: RE: [A4] Changing Control Arms...

Ya, things like this I just like to do and be done with.  Actually not
entirely true; I don't like to spend my time doing them at all anymore but
it's worth the savings.

When you say S4 list, are you talking Audifans or a subsection of Audiworld?
And B5 S4 or UrS4?

In the meantime, I'll go hunting in Passat land...thanks.


> From: brogers at terrix.com
> To: dbpulvino at hotmail.com; a4 at audifans.com
> Subject: RE: [A4] Changing Control Arms...
> Date: Thu, 15 Jan 2009 14:17:22 -0700
> Have fun with the pinch bolt!
> I did see a great write-up on a Passat forum (linked from AW) for a method
> to get the pinch bolts fairly easily. Might want to peruse the last ~2
> weeks on the S4 list - that is where I saw it...
> I've always (on both my former A4 and current S4) just done the whole
> deal...Bernie Benz would be ashamed :-)
> Brandon
> -----Original Message-----
> From: a4-bounces at audifans.com [mailto:a4-bounces at audifans.com] On Behalf
> Derek Pulvino
> Sent: Thursday, January 15, 2009 1:43 PM
> To: a4 list
> Subject: [A4] Changing Control Arms...
> The vehicle is a '99 A4 and among other things, getting the 1975 Dodge
> clunking in the front end. Yep, guessing some control arms need to be
> replaced. Even though only one side is clunking I figure as it's a common
> ailment, I just paid a mint on new tires, an alignment is required (and
> based on wear of my last tires needed), I might as well address this.
> I've read a little on Audiworld and Blau's site and looks fairly
> straightforward but maybe a touch time consuming. Wondering if others who
> have done this job could chime in on what kind of time commitment I'm
> looking at and if there are any oddities I should expect along the way.
> Also, does just a wholesale update using like a full Blau kit make sense
> am I throwing good money after bad? Any special tools?
> If nothing else, I guess living in the saltless streets of Seattle should
> a blessing for undoing bolts.
> dp
> _______________________________________________
> A4 mailing list
> A4 at audifans.com
> http://www.audifans.com/mailman/listinfo/a4

More information about the A4 mailing list