[ba] need advice - interested in 2000 A6 2.7T
centaurus3200 at yahoo.com
Mon Dec 29 11:03:41 EST 2003
wow, ti, you have a nice stable of audis!
thanks for the advice. i wanted to first join this
group, as you all represent enthuiasts that i can
meet. being we all live in the same area.
--- Ti Kan <ti at amb.org> wrote:
> robert weinberg writes:
> > [ A6 2.7T ]
> > what are the right mods for these cars? i know the
> > turbos are a bit small for adding more boost AND
> > you have to take out the engine to replace them.
> > how much power would be gained by just intake and
> > better flowing turbo back exhaust?
> Probably not a *whole* lot without also an ECU
> software mod. But then
> I am just guessing. Most people who do mods on
> 2.7Ts start with
> the ECU first and then go from there, because that
> gives you the
> most power increase for the money. As you noted
> correctly, the K03s
> do have their limits and "chipping" takes away the
> safety reserves
> built in from the factory. However, the various
> vendors' chips vary
> in how hard they push things and if you're not
> abusing the car (and observe
> proper warm-up and cool-down procedures), then
> chances are chipping alone
> could be perfectly good way to go if you're not
> looking to spend a lot
> of money.
> I don't know how many people on the "ba-group" list
> have 2.7T cars,
> but you might try subscribing to the "biturbos4"
> list also hosted on
> audifans.com. There are some A6 2.7T people lurking
> on there, and
> of course the S4 biturbo has the same engine too.
> 2003 A4 1.8T multitronic
> 2001 S4 biturbo 6-sp
> 1984 5000S turbo
> 1980 4000 2.0 5-sp
> R 1 3 5 Ti Kan
> |_|_|_| http://www.amb.org/ti
> | | | Vorsprung durch Technik
> 2 4 6
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
More information about the ba-group