[ba] AUDI 100CS Radio
Steven.Buchholz at kla-tencor.com
Wed Mar 24 18:21:27 EST 2004
... I think I would advise the opposite approach ... use a voltmeter and
check to see if you have +12 and ground supplied. To me there is a lot more
risk of major damage trying to directly wire to the battery ...
The other thing I know is that failure of the on/off switch on the deck
San Jose, Kaleefohnia (USA)
> Open your hood, attach wires from the battery to the pos/neg leads of
> the radio and confirm it lights up. That way you don't have to wonder
> if there's some other issue with bad fuses, leads under the dash etc.
> Make sure you get pos to both the power lead and the trigger
> lead. One
> supplies power to the unit the other switches it on when you turn the
> key on etc. If you have power to the unit but no trigger 12V it will
> look dead even though it's okay.
More information about the ba-group