[Biturbos4] clamps for small hoses

Quincy Chiang b5quattro at shaw.ca
Mon Nov 8 13:04:05 EST 2004

Or zip-ties.  Many people on AW have been using them with no problems, and I used it on one of the BPVs a few months ago when I changed the pair.  I actually managed to reuse one of the factory spring clamps.


----- Original Message -----
From: Igor Kessel <KBATPO at comcast.net>
Date: Monday, November 8, 2004 10:48 am
Subject: Re: [Biturbos4] clamps for small hoses

> David Kavanagh wrote:
> > I need to test my bypass valves and see that the hoses are held on
> > with those one-time-use clamps. A local lister (Phil) pointed me to
> > the local Lowes store for the spring type clamps, but I could 
> not find
> > them, nor could any store personel. The screw-type clams just aren't
> > good for hoses this small, any other ideas? (or sources to check?)
> > 
> > David
> > 
> www.mcmaster.com
> -- 
> Igor Kessel
> two turbo quattros
> _______________________________________________
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
> http://www.audifans.com/mailman/listinfo/biturbos4

More information about the Biturbos4 mailing list