[Biturbos4] Headlight alignment
northrup at crazybug.com
Thu Aug 24 18:35:08 EDT 2006
I'm not sure it is to be done without the VAG tool. the xeon lights move
as the suspension moves (if you look on the driver side suspension, front
and rear, you will see two components that attach to the lower control
IIRC, those are positioners which 'talk' to the headlights.
when your suspension angles change, these adjust the headlights such that
you don't blind oncoming traffic... or at least that is the idea.
Here's how i adjusted mine, using the VAG-COM tool.
So far as the note goes, my car is lowered, but maybe not as much as some
others. I did not need to bend the sensor brackets.
94 rx7 twinturbo <- new alignment with more neg. camber today! yay.
00 S4 biturbo
On Thu, 24 Aug 2006, Chris Newbold wrote:
> Does anyone have "traditional" specifications for aligning the HID
> lights on the B5 S4? The Bentley manual isn't much help: it covers
> resetting the automatic light leveling via the VAG 1551, the location of
> the mechanical adjusters, and the use of the "Hella Beamsetter"-- some
> fiendish contraption for measuring and adjusting the lights.
> Of course I don't have one of these. I just want to do the job in my
> driveway, against a vertical wall and using a tape measure-- the way
> people used to align lights.
> Any tips?
> 2001.5 S4 Avant 6spd
> Biturbos4 mailing list
> Biturbos4 at www.audifans.com
More information about the Biturbos4