[Biturbos4] Annoying Issues with 2001 S4 6-spd
brayd at rogers.com
Wed Jan 30 12:48:42 PST 2008
So, something *is* broken? Is it a DIY job, or better left to the dealer
(e.g. need to know some tricks and/or special tools)?
> -----Original Message-----
> From: DocWyte [mailto:docwyte at comcast.net]
> Sent: Wednesday, January 30, 2008 3:08 PM
> To: David Bray
> Cc: BiturboS4
> Subject: Re: [Biturbos4] Annoying Issues with 2001 S4 6-spd
> You need to replace the inner door handle. It's about $55 and takes 10
> minutes to replace.
> David Bray wrote:
> > Hi Folks!
> > I have a couple of issues about which I’m hoping y’all can shed some
> > 1. The driver’s door handle on the inside has come loose to the point
> > it now splays out about a quarter-inch at rest. So far, the door still
> > opens normally and it doesn’t seem to be ready to fall off, but I’m
> > wondering if there’s something I can/should tighten or whether there’s a
> > piece broken inside (a spring perhaps)?
> > 2. When I push the clutch in to start the car, sometimes the starter
> > engage (because of the safety) and I have to “stand” on the clutch pedal
> > before it goes. As this is getting progressively worse, I was wondering
> > there’s something I can adjust myself or whether it’s a job for trained
> > mechanics only. (I’m not much of a “wrench” but expect this safety is
> > implemented mechanically.)
> > Thanks for any input!
> > Cheers,
> > David
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.16/1251 - Release Date:
> 1/30/2008 9:29 AM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.16/1251 - Release Date: 1/30/2008
More information about the Biturbos4