[Es2] Lots of ??
seiche at shadetreesoftware.com
Mon Aug 2 11:52:51 EDT 2004
Elijahallen92 at aol.com wrote:
> I'm putting my DSY 6 speed tranny in the coupe. Will I need different
>linkage? Will the quattrospeed short shifter still work?
You need a bunch of parts to put in a six speed. First off, you need
the tail housing from an S2 or RS2 if you had the transmission in an
S4. They are different. You also need the shift plate (bolts on to the
transmission) and linkage. Don't forget axles. Oh yeah, and the
subframe is different as well. I think that you can make the five speed
subframe work, but you will need to fit some large spacers to get the
mounts in the right place.
> I would like a full 3" turbo back high quality exhaust. Who makes such a
>thing and how loud are they? I saw 2Bennett has a downpipe and a 3" exhaust, any
>using this? I'd assume this is a very expensive exhaust knowing 2bennett.
I've been looking for someone to do a 3" exhaust for a long time for an
S2 or ur q. So far, everything out there is custom I believe.
> It looks like I'll need S2 half shafts to make the tranny fit, where can I
>get these and how much are they?
You can find that stuff on ebay.de or from Tobias Tschopp at
totsteile.ch in Switzerland. Tots will ship to the us, and should have
everything that you need.
> Anyone using a rear strut bar that can be taken out easily?
> Thanks for any help you can give. Going from the S4 I know the engine well
>but the rest of the car is all new to me.
>Es2 mailing list
>Es2 at audifans.com
More information about the Es2