[Es2] 5 X 112 hubs for '90 coupe quattro
chris.miller at infofoundry.com
Fri Feb 20 11:09:27 EST 2004
True. I'm using stock coupe q brakes on the front (calipers) and the S2 rotor is identical (other than bolt pattern) to the coupe rotor.
[i] The Information Foundry at Robert Bentley, Inc.
mailto:chris.miller at infofoundry.com
From: es2-bounces+chris.miller=infofoundry.com at audifans.com
[mailto:es2-bounces+chris.miller=infofoundry.com at audifans.com]On Behalf
Of Ben Klumper
Sent: Friday, February 20, 2004 11:05 AM
To: Jimmy Pribble; 'John Karasaki'; Matt twentyV; Loren Hansen;
es2 at audifans.com
Subject: Re: [Es2] 5 X 112 hubs for '90 coupe quattro
As far as I know, there is no difference in offset between the stock and S2
front hubs. Like the rears, the only difference is the bolt pattern.
----- Original Message -----
From: "Jimmy Pribble" <Jimmy at texasbankers.com>
To: "'John Karasaki'" <johkar at teleport.com>; "Matt twentyV"
<matt_20v at yahoo.com>; "Loren Hansen" <von_etter at hotmail.com>;
<es2 at audifans.com>
Sent: Friday, February 20, 2004 5:53 AM
Subject: RE: [Es2] 5 X 112 hubs for '90 coupe quattro
> > You can also use ur-S4 (1992 through 1995.5) front hubs in the front.
> > allows you to keep your G60 brake calipers and carriers and use the
> > brake rotors, too. BTDT.
> Agreed. I wish I had done that instead of going with the S2 front hubs.
> you use the UrS4 front hubs, the entire UrS4 factory and aftermarket brake
> bin is open to you, but the S2 hubs have a different offset requiring
> brackets, expensive Euro kits specifically for the S2, or the use of
> spacers. Live and learn. The rear S2 hubs are identical to stock in
> way except bolt pattern, so there is no reason not to use them (except for
> cost/availability issues).
> Es2 mailing list
> Es2 at audifans.com
Es2 mailing list
Es2 at audifans.com
More information about the Es2