[Es2] S2 A/C line

Ben Klumper bklumper at mdbworld.com
Sun Jul 4 12:43:13 EDT 2004

Hi Andy,

I purchased what I thought was the S2 line based on the part number on
Brandon's site. However, this line does not work. There is no way that it is
the correct line. I have a feeling it is the line for right hand drive cars.
Unfortunately, I am now stuck with a rather expensive brand new part. In the
mean time, I have re-used the coupe's line with some minor rebending and
some heat shielding. It still almost touches the turbo and I know this can't
be a good thing, but it wll do in the interim. I would suggest asking around
on the S2 forum to see if someone can help with the correct PN and compare
that to the one on Brandon's site to make sure it's not the same.


----- Original Message ----- 
From: "Andy" <AndrewS at Columbus.rr.com>
To: "ES2" <Es2 at audifans.com>
Sent: Friday, July 02, 2004 3:02 PM
Subject: [Es2] S2 A/C line

> I'm looking for a part number on the S2 a/c line because the coupes rests
> right up against the turbo. A while back some one mentioned that they are
> still running the coupes line but I think I would like to get the problem
> out of the way while the engine is apart. The engine is mounted and we're
> currently fabbing the cross member and 3" exhaust. Getting closer :) TIA
> Andrew Suttner
> '91 Coupe Quattro w/3B close by
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2

More information about the Es2 mailing list