[Es2] new project scope (long) -need feedback

Matt twentyV matt_20v at yahoo.com
Fri Mar 12 10:27:02 EST 2004

I would love a photo of that.  Based on previous
conversations, I'm not the only one with a front-
mounted BPV rubbing on the body metal just inboard
of the pass. headlight.  I've been thinking about
maybe putting an elbow in the plumbing and pointing
the valve to one side or the other.

--- Peter Schulz <pcschulz at comcast.net> wrote:
> ben/Rick:
> The 3B S2 uses a different IC-Turbo hose than the
> 200
> In the case of the S2, the TBV  is pointed to the
> passenger fender instead 
> of towards the front of the car
> -Peter
> At 12:05 AM 3/10/2004, you wrote:
> >Rick,
> >There are far more uniquely S2 parts required than
> >you might think to make everything work out. I'm
> still finding this out and
> >I'm near the end of my conversion! For example, the
> S2 locates the wastegate
> >frequency valve in a different position than on the
> 200 just to clear the
> >headlight/hood lock. There are many situations
> you'll come accross where
> >either an S2 part or some custom fabbing is
> required.
> >
> >Good Luck!
> >
> >Ben
> Peter Schulz
> 1990 CQ (perpetually awaiting S2 3b engine
> transplant)
> 1991 200 20v TQW indigo mica
> 1991 200 20v TQW titanium grey
> Chelmsford, MA USA
> peter at audifans.com  
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2

Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster

More information about the Es2 mailing list