[Es2] new project scope (long) -need feedback
pcschulz at comcast.net
Fri Mar 12 10:57:35 EST 2004
I'll post some pix this weekend....
Other than the BPV and downpipe, any other specific pix you would like me
to focus on?
I'll try to take pix on anything that I see that is different than the 200 3b.
For instance, on the S2 3b there is no valve on the crankcase breather
routed under the IC-TB pipe.
I also did not see the heater valve ( which on the 200 is attached to the
small coolant hose on the back of the head)
the S2 engine has most of the coolant hoses intact....
I also think that the positioning of the afterun pump is different than stock.
(Having seen the install in Matts car, I can attest that this would be alot
of work to replace AFTER the engine install)
So I'll snap away and post the results
At 10:27 AM 3/12/2004, you wrote:
>I would love a photo of that. Based on previous
>conversations, I'm not the only one with a front-
>mounted BPV rubbing on the body metal just inboard
>of the pass. headlight. I've been thinking about
>maybe putting an elbow in the plumbing and pointing
>the valve to one side or the other.
>--- Peter Schulz <pcschulz at comcast.net> wrote:
> > ben/Rick:
> > The 3B S2 uses a different IC-Turbo hose than the
> > 200
> > In the case of the S2, the TBV is pointed to the
> > passenger fender instead
> > of towards the front of the car
> > -Peter
1990 CQ (perpetually awaiting S2 3b engine transplant)
1991 200 20v TQW indigo mica
1991 200 20v TQW titanium grey
Chelmsford, MA USA
peter at audifans.com
More information about the Es2