[Es2] Clutch/Pressure Plate Poll

Ben Klumper bklumper at mdbworld.com
Mon Mar 15 13:22:54 EST 2004

What kind of HP and torque is Javad's 10vt currently producing?

----- Original Message ----- 
From: "Alexander van Gerbig" <avangerb at zoo.uvm.edu>
To: <es2 at audifans.com>; "Peter Schulz" <pcschulz at comcast.net>
Sent: Monday, March 15, 2004 11:12 AM
Subject: Re: [Es2] Clutch/Pressure Plate Poll

>     Yup, of course the good source I speak of is Javad.  20 track days,
> loads of dragging, and street driving on his 10v turbo with the stock 7A
> clutch setup.  I trust his word, but still being nit picky and err'ing on
> the side of safety.  In the end I will probably use the 7A pressure plate,
> R/S4 clutch disc, and looking to see if SPEC can have one of those alu
> pressure plates to me in two weeks.
>     Javad has a SPEC stage 3 setup for his monster 20v motor, apparently
> pressure plate is a stock 7A, same P/N as a standard 7A plate, so I am
> pretty much sold at this point.
>     Still would like to see the poll results and it would be interesting
> see what fits what.
> Cheers,
> Alexander van Gerbig
> Europrice
> http://www.euro-audi-parts.com
> contact at euro-audi-parts.com
> Waitsfield, VT 05673
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2

More information about the Es2 mailing list