[Es2] Big Brakes

Andy Suttner andrews at columbus.rr.com
Fri Nov 19 12:15:41 EST 2004

I think ive decided on the floating rotor set up. The hubs in front off of
the 200 20v and the rears off of a UR-S.


-----Original Message-----
From: Miller, Chris [mailto:chris.miller at infofoundry.com]
Sent: Friday, November 19, 2004 12:04 PM
To: Andy Suttner; ES2
Subject: RE: [Es2] Big Brakes

ECS are good guys.  Make sure you know what you're doing for the 5 bolt
swap; I'm pretty sure the fitment varies from the S2 to the big cars
(100/200/urS4/S6).  Think the hub thickness may be different, and with a
fixed caliper, that's pretty critical to center the caliper on the

-----Original Message-----
From: es2-bounces at audifans.com [mailto:es2-bounces at audifans.com] On
Behalf Of Andy Suttner
Sent: Friday, November 19, 2004 11:46 AM
To: ES2
Subject: RE: [Es2] Big Brakes

Thanks for the input i was looking at the ECS website and i think ill
give them a call this afternoon. There somewhat local to me which is
nice too.
The wiring is going well so far on the car. The engine side of the
harness is close to completion next is the interior part of the harness
and the start up :) Looking forward to driving the coupe again after
driving the Avants for two years.


-----Original Message-----
From: C1J1Miller at aol.com [mailto:C1J1Miller at aol.com]
Sent: Friday, November 19, 2004 9:01 AM
To: "Andy Suttner"; es2 at audifans.com
Subject: Re: [Es2] Big Brakes

In a message dated 11/19/2004 1:18:22 AM Eastern Standard Time, "Andy
Suttner" <andrews at columbus.rr.com> writes:

>Just checking around for a big brake kit/parts. Was going to do a kit
>with the four bolt wheels but an issue came up and that will no longer
>Now I'm searching around for a kit for the coupe with 5 bolt wheels.
>What solutions did you guys use? I have the RS2 caliper brackets for
>building a kit myself. Where did you guys get the set ups? What kind of

>prices should
>expect? I see most kits go for about $2000. TIA

My coupe has the S2 5-bolt hubs.  I used the RS2 brackets to mount my
2000 Porsche Carrera calipers, over euro 314x30 A8 rotors.  Barely fits
in my 16"
urS4 5-spoke wheels; really more brakes than you need.  You should also
change the brake proportioning valve to fix the bias if you add
bigger/different brakes.

I'm in Massachusetts; you're welcome to see the car/test fit wheels.

Es2 mailing list
Es2 at audifans.com

More information about the Es2 mailing list