[Es2] changing EM with engine in car???

Ben Klumper bklumper at mdbworld.com
Mon Oct 11 21:38:08 EDT 2004


I would think that it is possible to remove the EM without pulling the
engine. I removed the turbo and downpipe with the engine in the car which
frees up a lot of room to get at the EM. It shouldn't be a problem.


----- Original Message ----- 
From: <Elijahallen92 at aol.com>
To: <es2 at audifans.com>
Sent: Sunday, October 10, 2004 2:37 PM
Subject: [Es2] changing EM with engine in car???

> Hi all, I sent this out last week with no reply. Is there anyone who has
> tried this? Just looking for some experiance so that I know what I'm in
> Thanks,
> Elijah
> >Hey guys, well since I have had no hands on in this project so far I
> don't know much >about the coupe and the clearances with the AAN. I
> the car from Andrew Jackson >with a spun rod bearing and instead of
> it here to do the work myself I just let the >shop that he had  used for
> original install re-install my bottom end and extras to be done  >with it
> faster. Well at this point I wish I would have just done the work  myself
> its >taking way longer than I expected. Anyway my question is,  can you
> the exhaust >manifold off without taking the engine out? I have a  tubular
> header coming but its going to >be a bit by the time I get it and  have it
jet hot
> coated I think they will already have the >engine in with the  RS2
manifold on
> it. Let me know your thoughts.  Thanks,
> >Elijah
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2

More information about the Es2 mailing list