[Es2] No radiator fan= wtf?

C1J1Miller at aol.com C1J1Miller at aol.com
Wed Oct 13 10:01:07 EDT 2004

I agree with properly bleeding all air out of the system.  Sometime it helps to take the small hose off at the overflow bottle, and raise the end up a couple feet over the motor, then pour coolant/water into that hose (on the 200; don't know the radiator setup you are using).

You can easily change the thermostat without messing with the timing belt and water pump; 2 10mm bolts.  Doable with everything installed, but a pain.  Better if you pull the power steering pump (or radiator).  But I'd start with bleeding the hell out of the system.  


More information about the Es2 mailing list