[Es2] anyone that did a 6 speed conversion, Help

Bluemaxww1 at aol.com Bluemaxww1 at aol.com
Thu Sep 30 17:53:23 EDT 2004

You need the S2 6 speed transmission mounts.  On the driver's side, you need 
a shim between the transmission subframe and the transmission mount.  Or you 
pick up a B4 trasmission mount, this is the same subframe used on the European 

I would show you a picture, but alas the car is on the deck and I don't have 
a lift.  Next week I could take pictures as I am doing the brakes.

What are they going to do to the front axles to make them work?  The six 
speed shafts are a different length than the normal coupe shafts.


In a message dated 9/30/2004 12:03:41 PM Pacific Daylight Time, 
Elijahallen92 at aol.com writes:

> Hi all, I just talked to the shop and they are having trouble with the 6 
> speed install. They say the front halfshafts will work and they can modify the 
> rear section of the driveshaft to work but need to figure out what to do on 
> the mounts. What have you guys done? Any pictures? Thanks,
> Elijah

More information about the Es2 mailing list