[Es2] used s2 hubs

Ben Klumper bklumper at mdbworld.com
Fri Feb 25 13:27:14 EST 2005

I did not have a good experience with Flexx (which eventually got resolved 
over a year later) so buyer beware.
The S2 forum is where I found my hubs. They came from Italy and were in very 
good condition. I just posted an ad in the 'wanted' section.


ps - Your shimmy is likely from unbalanced wheels, not brakes...

----- Original Message ----- 
From: "David Kase" <davekase at pdqlocks.com>
To: "Kenneth Keith" <auditude at gmail.com>
Cc: <es2 at audifans.com>
Sent: Friday, February 25, 2005 11:00 AM
Subject: Re: [Es2] used s2 hubs

> Flexx on the forum breaks S2's regularly and ships to the USA.  Be sure
> to nail down the condition very specically before you buy.  If you do
> not ask about the specific condition, he will not tell you.  BTDT
> Dave Kase
> '90 CQ
> Kenneth Keith wrote:
>>My CQ has a brake shimmy or some other such nonsense in the front when
>>I hit the brakes.  I have some 18x8" OZ Superleggera's without tires I
>>was going to put on my 200q20v.  I'm thinking that since I need to
>>give the brakes some attention, since I'll need to upgrade them later,
>>and since I have the wheels already, that I should explore the idea of
>>converting to S2 hubs and then do the bolt on 996 caliper big brake
>>route with the OZ's on that car.  I also already have RS2 caliper
>>I see that Alex has S2 hubs for like $700.  I would like to explore
>>the possibility of getting some used ones from Europe.  Has anyone
>>done this?  Are there any "breakers" over there that will pull and
>>ship to the U.S.?  I checked S2forum and saw a thread about this
>>subject, but the main question never got answered.
>>Es2 mailing list
>>Es2 at audifans.com


> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2

More information about the Es2 mailing list