[Es2] Re: [s-cars] MAF to intake side of turbo

Elijahallen92 at aol.com Elijahallen92 at aol.com
Sun Jun 5 09:37:56 EDT 2005

 The MAF sits right in front of the filter in stock form. I just want  to 
move it over to the intake side and let the turbo blow through it instead of  
sucking through it. It wouldn't have any more debris over there than it would  
right in front of the air filter. My worry is more about how turbulant the air  
will be at that point and if it will just suck the hot wire right out.

In a message dated 6/5/2005 9:25:28 AM Eastern Standard Time,  
fastscirocco_2000 at yahoo.com writes:


The only potential problem is debris damaging the MAF  (assuming it
would be in front of the filter). Now if you addressed that  issue with
a screen or flter it should be fine in my  thinking.


--- Elijahallen92 at aol.com  wrote:

> Hey guys, I've been reading about a few guys in the UK  moving the maf
> to  the 
> intake side and having no issues.  Anyone done this yet here? I am
> thinking  
> of moving mine  to the intake pipe just before the intake manifold
> right before   
> where the ISV goes in. This will let me free up the turbo cold  side
> and go to 
> a  4" intake. Thanks for any  input.
> Elijah
>  _______________________________________________
> S-CAR-List mailing  list
> S-CAR-List at audifans.com
>  http://www.audifans.com/mailman/listinfo/s-car-list

AUDI -  Accelerates Under Demonic Influence.

Discover Yahoo! 
Use Yahoo! to  plan a weekend, have fun online and more. Check it out!  

More information about the Es2 mailing list