[Es2] aan swap to coupe....helpppppp.
seiche at shadetreesoftware.com
Thu Jun 16 11:25:33 EDT 2005
AAN into a CQ and cheap do not go together, unless you can do all your
own fabrication work and your time is not worth much. Do your research
up front to save yourself money and hardship.
My advice would be to go to ebay.de and search for RS2 or S2 ABY parts.
That will be the cheapest route. You can also try totsteile.ch. Tots
parts out RS2s and S2. Figure about $2500 to $3k to get the parts,
more if you get an RS2 or S2 front bumper. My guess is that most guys
that have done the 20Vt swap have about $5k into it for a "basic" swap,
with some spending considerably more to get it "right". YMMV...
IMAIAMI at aol.com wrote:
>I have an aan motor from a 95 urs4 in my 90 coupe.....
>I didn't realize the extent up until now of the fab work and all the goodness
>that I am going to have to undergo........
>do any of you know of any aan manifolds that will clear the radiator that are
>cheaper than the dahlback one?
>and even with the dahlback one, or one just like it, to what extent will I
>have to redirect the piping?
>does any one know of a way to maker her driveable for cheap?
>Es2 mailing list
>Es2 at audifans.com
More information about the Es2