[Es2] Rebuilding a K24 turbo
chris.miller at infofoundry.com
Fri Mar 18 13:30:18 EST 2005
Did you compare it to some others? I'd expect a little shaft play; no
damage to impellers, and not a ton of oil in the housing. If so, use it
as is. It will be mounted with new fasteners; if it isn't working well
or burning a bunch of oil, it probably wouldn't be that hard to pull off
even installed in the car.
$100 for the reseal kit sounds about right.
From: es2-bounces at audifans.com [mailto:es2-bounces at audifans.com] On
Behalf Of Peter Schulz
Sent: Friday, March 18, 2005 10:53 AM
To: CaptMagu at aol.com; es2 at audifans.com
Subject: Re: [Es2] Rebuilding a K24 turbo
Thanks Hap, but I was looking at DIYing it....
At 10:46 AM 3/18/2005, CaptMagu at aol.com wrote:
>Turbo Engineering in nearby Golden CO can rebuild these at a reasonable
>cost. Talk to the owner, Jim Latour. 303-271-3997. On a recent visit,
>Jim had to take a call from none other than Corky Bell. This is the
>shop that Corky uses to source his turbos.
>Hap, wit dakine Happersized turbohs in Evahboost, Maguire
1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1991 90 20v Q Red
1990 CQ silver (awaiting S2 engine transplant)
Chelmsford Ma, USA
Es2 mailing list
Es2 at audifans.com
More information about the Es2