[Es2] Question about RS2 injectors...

Peter Schulz pcschulz at comcast.net
Wed May 11 16:50:44 EDT 2005

Found this in the archives,,,,,


Delivered-To: 200q20v at audifans.com
From: "Brian Link" <brianl at starsys.com>
To: <200q20v at audifans.com>
Subject: Injectors anyone???

Date: Wed, 23 Oct 2002 18:19:18 -0600

Hey gang,

Do any of you guys want to split a set of 10 brand new Siemens Deka
36lb/hr or ~378 cc/min, high impedance with me?   Bosch RS2 injectors
flow (from my memory)  360 cc/min so these are similar.  They will fit
the same application as the Bosch they are high impedance with the
diffuser disks vs the pintel type in our cars, and they have all been
flow tested.  The set of ten are about $400 with shipping so it will be
$200 a piece.

Let me know
Brian Link
Boulder, CO.

At 02:19 PM 5/9/2005, you wrote:
>Just received a set of fuel injectors that I purchased from ebay. The 
>seller said they were stock RS2 injectors, however, they do not have an 
>Audi part number or logo on them. Instead, the injectors say "Siemens" 
>with "Deka" written below it. The injectors also have the number 9267 on 
>them. Does this sound stock to you? If not, anyone else heard of or have 
>experience with these injectors? Flow rates?

1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1991 90 20v Q Red
1990 CQ silver (awaiting S2 engine transplant)

Chelmsford Ma, USA 

More information about the Es2 mailing list