[Es2] anybody out there?

elijahallen92 at aol.com elijahallen92 at aol.com
Wed Jan 18 20:56:28 EST 2006

 I see K24's come up on ebay here and there. As for the RS2 tranny, do you have the S2 front halfshafts and V6 front subframe or a spacer? If not you'll need these as well, I used the 4000cs driveshaft and it worked fine. Anyway, sounds like things are moving along. Winter has been my big hold up as well (unheated garage).
-----Original Message-----
From: Mike Teter <mike at nittigritti.com>
To: es2 at audifans.com
Sent: Wed, 18 Jan 2006 11:12:59 -0700
Subject: Re:[Es2] anybody out there?

Progress continues here, albeit slow. Too many other projects and the cold weather is no help. 
Waiting on head porting work to be completed and needing a turbo to complete the parts. Matching up the 200 wiring harness to the CQ intimidates me as does pulling the dash, so I'm reading every bit I can on solving the wiring puzzle before diving in. 
Issues that need advice / help: 
I need a new turbo, TEC in Denver disassembled what I had and sent it back in pieces after they closed up shop. Any unwanted K24s out there? 
Should I pull a driveshaft from a 4000 CS to use with the RS2 tranny or should I have my CQ shaft cut shorter? 
Did I mention I need a turbo? 
Kind regards to you all, 
Mike Teter 
Colorado Springs, CO 
> Seems like the list has slowed to a crawl, probably due to winter. 
> My progress: none in months. Too poor, too cold, too busy. 
> Need to integrate the 3B wiring to the '91 coupe q soon... if I can 
> recall which wire goes where after not looking at them for months... 
> also need to replace the foam in the airbox and reinstall it. 
> --- 
> Chris Miller 
> Training Development 
> [i] The Information Foundry at Robert Bentley, Inc. 
> Tel: 617.528.4113 
> Cell: 617.875.3792 
> mailto:chris.miller at infofoundry.com 
> http://www.infofoundry.com 
Es2 mailing list 
Es2 at audifans.com 

More information about the Es2 mailing list