[Es2] Coupe 5 lug conversion

Ben Klumper bklumper at mdbworld.com
Thu May 25 01:26:24 EDT 2006

I have done the S2 5-bolt conversion. In the rear I'm running stock S2 rear 
rotors and stock coupe quattro calipers. Up front I have 323x30 A8 rotors, 
RS2 caliper brackets and porsche 996 4-piston monobloc calipers. Everything 
is a straight bolt-on with the exception of some custom bending on the hard 
brake lines going to the 996 calipers. Very nice setup but there are 
countless other options for front and rear. Just depends on what you want to 
spend. My setup cost me less than $1000 front and rear including the hubs.



----- Original Message ----- 
From: "Maxwell Lowry" <rabimoose at gmail.com>
To: <es2 at audifans.com>
Sent: Wednesday, May 24, 2006 8:39 PM
Subject: [Es2] Coupe 5 lug conversion

>I have been working on a 5 lug conversion on my 1990 coupe quattro, and I
> have been trying to figur out what combinations or brake calipers and 
> rotors
> I need to complete my project.  Any help would be greatly appreciated.
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2

More information about the Es2 mailing list