[Es2] rs2 fan cowl/shroud part number

[Dan Daunais]

I continually ate fuses until I beefed up the ground wire and split the
power wires into two 14 gauge in parallel.  I believe on high speed that
puppy is pumping around 42 amps.

Best
-Dan

On Wed, Aug 6, 2008 at 7:20 PM, Peter Schulz <pcschulz at comcast.net> wrote:

> Chris:
>
> Make sure that you either use the fan harness wiring from the 200, or
> set up an 80amp relay with stock CQ fan harness....
> Couple of folks on Motorgeek reported that the CQ wiring can't handle
> the current draw of the 200 fan motor....
>
>
> -Peter
>
>
> At 05:51 PM 8/6/2008 -0400, Chris Miller wrote:
> >Anyone know a good USA part number for the shroud to use the 200q20v
> >radiator fan with the stock coupe size radiator?
> >
> >Chris
> >
> >_______________________________________________
> >Es2 mailing list
> >Es2 at audifans.com
> >http://www.audifans.com/mailman/listinfo/es2
>
> -Peter Schulz
> Chelmsford Ma, USA
> http://www.naaclub.org/
>
> 1995.5 S6 Avant Emerald/Ecru
> 1995.5 S6 Avant Silver/Platinum
> 1991 200 20v Q Avant Titan Grey (for sale)
> 1991 90 20v Q Red
> 1991 CQ silver  (eS2 recipient)
>
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2
>