[Es2] RS2 shifter

Ben Klumper bklumper at mdbworld.com
Wed Jun 11 07:50:56 PDT 2008

I have a complete set of RS2 linkage that someone could borrow as a 
template. However, I plan in doing the install later this summer so I'd need 
it back. If any of you are interested (and I know you are!), drop me a line 
and we can sort something out shipping wise. In the interest of keeping all 
the small, hard to find parts together, I'd prefer that it went to only one 

Ben Klumper, Architect AAA
MDB Design Group + Eleven Eleven Architecture
103-1111 11th Avenue SW
Calgary, Alberta
T2R 0G5
p. 403.229.2037
f. 403.229.2517

----- Original Message ----- 
From: "Ben Swann" <benswann at verizon.net>
To: "'Peter Schulz'" <pcschulz at comcast.net>
Cc: <es2 at audifans.com>; "'Sean cole'" <v8coupe at gmail.com>
Sent: Wednesday, June 11, 2008 7:31 AM
Subject: Re: [Es2] RS2 shifter

> If anyone has some specifics on this please send them to me.  I'll have to 
> search on
> this later - would be good to know about doing this as an alternative - I 
> think I have
> an S4 linkage, but must not be B5 since it obviously won't work, or maybe 
> I'm missing
> something.  It is conceivable that modifying the length of some of the 
> rods might do the
> trick, but still missing something that adapts to the transmission itself.
> Thanks for the info. Peter - I'll check it out when I can.
> Ben
> -----Original Message-----
> From: Peter Schulz [mailto:pcschulz at comcast.net]
> Sent: Wednesday, June 11, 2008 9:20 AM
> To: Ben Swann
> Cc: 'Sean cole'; es2 at audifans.com
> Subject: Re: [Es2] RS2 shifter
> I do know that folks that have been installing 01E transmissions have 
> successfully
> modified the B5 S4 shifter and rod assembly, without the need for the RS2 
> parts...
> there are a number of threads on Motorgeek, under the user ids
> fasterthanrs2 and a4kquattro....
> -Peter
> At 09:07 AM 6/11/2008 -0400, Ben Swann wrote:
>>I have been trying to source or replicate an RS2 shifter as well.
>>I'd be interested in knowing what you come up with.  In particular if
>>any parts from 200Q20V, 4000 Q/UrQ, or other (S4/S6) shift linkages can
>>be used, altered or combined to fab up the linkage.
>>I did notice the strange looking plate you are referring to and would
>>like to know what you come up with on this as well.
>>I have a contact in Europe right now trying to obtain a linkage, but so
>>far  - No Go.
>>It would be good to know if we can modify parts from domestic Audis or
>>other to fab the linkage.
>>-----Original Message-----
>>From: es2-bounces at audifans.com [mailto:es2-bounces at audifans.com] On
>>Behalf Of Sean cole
>>Sent: Thursday, June 05, 2008 9:21 PM
>>To: es2 at audifans.com
>>Subject: [Es2] RS2 shifter
>>Hello ALL,
>>Well been a long time since I've posted up on this list.  I need your 
>>I am working on rebuilding my 91 CQ, ok so i'm rebuilding it with
>>everything in HP mode, but back on task.  I need to borrow if some one
>>has it the RS2 pivot plate.  The plate that mounts to the transmission
>>and makes the shifter work.  My shifter assembly is missing this and I
>>need to borrow one to replicate it for my build.
>>91 CQ v8 TDI 6-speed and some
>>Es2 mailing list
>>Es2 at audifans.com
>>Es2 mailing list
>>Es2 at audifans.com
> -Peter Schulz
> Chelmsford Ma, USA
> http://www.naaclub.org/
> 1995.5 S6 Avant Emerald/Ecru
> 1995.5 S6 Avant Silver/Platinum
> 1991 200 20v Q Avant Titan Grey (for sale)
> 1991 90 20v Q Red
> 1991 CQ silver  (eS2 recipient)
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2 

More information about the Es2 mailing list