[Marketplace] Cars: 1987 5000cs TQ
marketbot at audifans.com
Thu Nov 3 18:29:44 EST 2005
Title: 1987 5000cs TQ
Location: Cherry Hill, NJ
Date: November 03, 2005
Email: audijim at audi5turbotech.com
I'm thinking of selling my 1987 5000cs Turbo Quattro. She has served me very well since I bought it about 6 years ago. I need to down size and I would like to sell this car with a ton of spares that will go with the car. I call my car a 5000/Euro 200 because I have some gray market import 1984 Audi 200 TQ parts on the car. Euro front bumpers, hood (hood struts are mounted differently), Euro headlamps plus another set of brand new Euro headlamps with Stoneguard installed on them. The Speedo is in MPH, the Fuel gauge in Liters, the Coolant gauge in Celsius. All the warning symbols are in German. I removed the Speedo and touched up the solder joints. No bouncing Tach. I have installed Sport seats from a 1992 Audi S4. They are Ecru in color. Fully functional power except headed seats. I have the heated seat wiring harness from an S4 in a box, not installed. The rear seat is original 5000 in Black. Stebro stainless steel exhaust system w/ high flow CAT (down pipe back) with all new
exhaust hangers I installed this week, Vented rear rotors and brake calipers from an S4/S6/V8, Rear calipers are brand new installed this late spring/early summer, Custom stainless steel braided brake lines that are clear sleeved to prohibit dirt and foreign debris getting into the braids, Intended Acceleration chip, Wastegate from an AAN (adjustable spring perch), One spare ECU, White powder coated engine parts (valve cover/upper and lower timing covers and timing cover back plate), upper strut bar fabricated from OEM S4/S6 strut bar. S4 brake master cylinder and S4 brake fluid reservoir (needed for the upper strut bar mod) I have an extra Euro front bumper and 2 (two) extra lower front bumper spoilers, I have 4 door skins from a 100/200 for the flush door handle mod I wanted to do. I think I also have 4 door frames. I have extra front and rear subframes. The rear subframe is complete with rear diff and control arms. The front subframe is complete with control arms and sway bar. I
have a few sets of front and rear struts, I have a couple transmissions, 2 or 3 spare instrument clusters (USA models) and few steering wheels. I have a spare MC head that I was getting ready to install on the car. I have an exhaust leak most likely from a broken exhaust manifold stud. I have already drilled out all the EM studs and installed Heli-coil threads. I was planning on porting the head and then getting a valve job done with new guides. I was planning on getting the car painted Porsche Grand Prix White, and I have a set of Fuchs Rally wheels that are painted PGPW. They look fantastic and will go with the car. The car is partially pearl effect white, the hood and trunk lid are off the Euro 200 and are Alpine White. The 4 door skins are also Alpine White. I have a set of Fuchs that are Gloss Black on the car now, but these wheels are not going with the car. I have spare cams and I will provide a complete cylinder head gasket kit and ARP head studs that I was going to install.
I have a spare OEM exhaust manifold that has very low mileage on it (no cracks), I installed a brand new A/C compressor this summer. I recently wrote the list about a no warning engine cut out. I have since replaced the spark plugs, wires and installed a new distributor with cap/rotor and also a new fuel pump relay. Radiator is about 1 1/2 years old. Brakes are all new this early summer. I have a couple complete airboxes with fuel distributors that will go with the car. Basically, every type 44 part I have and can find, will be sold with the car. Please call for more info. I'm looking for $3500/OBO due to all the extra parts. More picture available upon request.
[ This is an automated message ]
[ You are receiving this message ]
[ because you signed up for the ]
[ Marketplace email notification. ]
More information about the Marketplace