[Marketplace] Cars: 1995 90QM Built for speed
marketbot at audifans.com
Tue Aug 26 17:16:03 PDT 2008
Title: 1995 90QM Built for speed
Location: Oakland, CA
Date: December 08, 2007
Email: sean at rtuning.org
You are looking at a 1995 Audi 90 Quattro 5 speed manual built by a race track driver for on the road fun or weekend track days. Had the car on track once last year, performed brilliantly and should do even better now with engine and suspension rebuilds with uprated parts.
I'll give all details here and full list below as its a LONG list! All parts are purely function, this is a fun car to drive! I will admit a few too many speeding tickets with this beast. While I am sad to see her go, I need to focus my attention on my business and have a different project in mind when I pick it up again.
I am asking 6700 obo (so drop me a line and we can talk). This is higher than the blue book, but I have somewhere over 10k in receipts NOT including my purchase price for the car itself!! Peruse the list of mods and you will see what I mean. I can send more pictures as requested, so feel free to inquire.
Motor has in the last 20k been re-ringed, gasketed, new studs, bolts, bearings, seals, etc when ported big valve heads went on. This thing purrs very nicely!
And now, on to the list:
Nology Hot Wires
Bosch F6DTC Plugs
VAP pro-mount strut mounts with race-savers
2Bennett Koni coilovers, 350lb front, 500lb rear
2Bennett Delrin suspension bushings
Brembo Rotors all around
PBR Ceramic pads bedded all corners
ATE Super Blue
17x7 4x108 ASA AR1
225/45ZR17 Bridgestone RE960 A/S Pole Position
Ported high flow AFC exhaust manifolds
Single 2.5" Borla
Mocal 180Â°F thermostatic oil cooler sandwich adapter
1.5x8x11" Oil Cooler
10W40 Redline motor oil
75W90 Redline rear differential
MT90 Redline transmission
RT bored MAF
RT Flared, silicone insulated aluminum honed finish flow tube
RT velocity stack hose coupler, honed finish
VAP high velocity recovery sleeve
3" turbohoses silicone 90Â° and straights
VAP SXTB+ Rare 776 CFM over 200% increase
AFC Block with better oiling system
RT ported AFC heads
AAH lightweight cam sprockets
AFC pistons for boosted compression, 10.0 to 10.3:1
Ceramic coated valve covers
41mm oversize 7mm stem 6.5mm undercut intake valves - stainless w/ black nitride coating
34mm oversize 7mm stem 6.5mm undercut exhaust valves - stainless w/ black nitride coating
HD dual valve springs
ARP undercut head studs
034 Race density transmission mounts (2) durometer 80 (90% stiffer)
034 Poly snub engine mount w/ bracket
Depo H4 headlights
80/100W Hella high performance zenon +100% bulbs
Alpine CD Unit
Probably more that I'm forgetting...
Now, the bad:
Broken front right headlight. Think somebody backed into it, but its a cheap replacement on EBAY.
A/C doesn't work, needs recharging but is R-134 and cheap to do
Driver door has dent, buy the car, I have a spare clean door that goes with!
Exhaust rattles in rear a little, was going to re-do with equal length headers, but selling instead. Still have headers, the ONLY set for sale I know of! Would throw in for measly low price of 300 extra with car.
Pulled power door lock fuse cause they were acting up, think the vacuum motor is shot have replacement that goes with car.
Other parts that come with:
"S" OE Spoiler, needs painting, its red.
Ported intake manifold, will provide HUGE power and fuel mileage gains, just needs to be bolted on.
Cone filter and adapters
and lots more spare replacement parts and such
Other than that, I think that covers it! Heated seats and sunroof work fine, etc. Just looking for a good home!
[ This is an automated message ]
[ You are receiving this message ]
[ because you signed up for the ]
[ Marketplace email notification. ]
More information about the Marketplace